Team Chevelle banner

HP/TQ and ET/MPH of my new combo please

1K views 12 replies 9 participants last post by  67shortbox 
#1 ·
.030 over 427 (433)
factory crank and rods
balanced and decked
SRP 158830 pistons approx. 12-1
Comp solid roller 11-693-8
262/262@.050 .652/.652 lift lc 110 ic 106
Dart Pro 1 alum heads 310 cc 119 chambers
2.25/1.88
Hooker 2 inch headers
Vic Jr intake Holley 850 HP carb


350 turbo trans full manual with forward pattern
10 inch TCI 3600 convertor


Ford 9 inch with Strange center and 4.86 gear


30x 12 slick 3800 lb 67 chev C10 truck (shortbox) if I am missing anything please let me know, Thanks
 
#4 ·
My Elky.427 +.070,440 cid.,not decked,13-1 cr. Same Comp cam,cheapie Pro Comp 300 oval heads.Strip Dominator intake,Holley 4150 hp 1000.Dynoed 635,runs 10.45,128,3900lb, 4 speed,4.88 gear.See signature.
 
#6 ·
Looks good except converter. That combo would love a 8'' 5500 or higher stall converter. I probably only have approximately 400 hp and go 11.70, with a 5200 rpm shift point, yet I run a 4500 stall .With your combo I would be looking for mid-low 10's when optimized.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top