Join Date: Jul 2007
Location: Siloam Springs ar
Re: PRO COMP oval port BBC heads
the procomp heads are mass-produced in china BUT they were machined in austrailia, so all the spec work is austrailian, the mold was sent to china and that is where it is mass-produced,
i work at a speed shop that sells these heads, actually sold 5 bare sets today!
if you are on a budget and you are building a street/mild strip hot rod.. these heads are perfect! if you are building a all out drag car or serious street/strip then buy you some afr or brodix ect..
i've seen these heads in person and dont look bad at all not any worse than edlebrock or any cast iron head i've seen!
everyone is titled to his or own opinion, mine is to listen to someone who personally have used them as apposed to a "bench racer" who knows everything about something they never have seen or ran in person!
best example... look at the professional products line! they have "china" stamped all over the products, amazing results!